Orientation and Type of Non-dental Glass Fiber Towards The Flexural of Fiber Reinforced Composite
(1) Universitas Muhammadiyah Semarang
(2) Universitas Gadjah Mada
(3) Universitas Muhammadiyah Semarang
(*) Corresponding Author
Abstract
Introduction : Non-dental glass fiber can used as alternative dental glass fiber. Flexural strength to withstand masticatory loads that influenced by various factors, including the orientation and type of fiber used. Purpose : The purpose of this study was to see the effect of orientation and type of non-dental glass fiber on flexural strength. Method : The research method used FRC samples measuring 65 x 10 x 2,5 mm which were reinforced with non-dental glass fiber mats, roving, woven roving, and dental glass fiber roving. Non-dental glass fiber mats and woven roving was cut according to the length and width of the sample, while the non-dental glass fiber roving was weighed according to the weigh tof 4 sheets of dental glass fiber roving to meet the sample mold zone. Result : Glass fiber placed in the tension position in the sample mold. The flexural strength was tested using universal testing machine. This study indicate that the type of glass fiber doesn’t have a significant effect on the flexural strength of FRC with reinforced non dental glass fiber and dental glass fiber. Conclusion : The orientation of non-dental glass fiber roving as reinforcement of FRC has greater flexural strength than non-dental glass fiber with mats and woven roving orientation.
Keywords
Full Text:
PDFReferences
Sharafeddin, F., Alavi, A., dan Talei, Z., 2013, Flexural strength of glass and polyethylene fiber combined with three different composites, Journal of Dentistry (Shiraz), Vol.14 (1) : 13 - 19
Caixeta, R.V., Guiraldo, R.D., Berger, S.B., Kaneshima, E.N., Junior, E.M.F., Drumond, A.C., Junior, A.G., dan Lopes, M.B., 2015, Influence of glass-fiber reinforcement on the flexural strength of different resin composites, Applied Adhesion Science, Vol. 3 (24) : 1-6
Septommy C., Widjijono, Dharmastiti, R., 2014, Pengaruh posisi dan fraksi volumetrik fiber polyethylene terhadap kekuatan fleksural fiber reinforced composite, Dental Journal Majalah Kedokteran Gigi, Vol.47 (1) : 52-56
Sari, W.P., Sumantri, D., dan Imam, D.N.A., 2014, Pemeriksaan Komposisi Glass Fiber Komersial dengan Teknik X-Ray Fluorescence Spectrometer (XRF), Jurnal B-dent, Vol.1 (2) : 155-160
Butterworth, C., Ellakwa, A.E., dan Shortall, A., 2003, Fibre-Reinfoerced Composites in Restorative Dentistry, Dental Material, Vol.30 (6) : 300-306
Aditama, P., Sunarintyas, S., dan Widjijono., 2015, Pengaruh Jenis dan Volumetrik Fiber terhadap Kekuatan Transversal Reparasi Plat Resin Akrilik, Majalah Kedokteran Gigi Indonesia, Vol.1 (1) : 102 - 108
Vallittu, P.K., 2014, Glass Fibers in Fiber-Reinforced Composite, In Jukka. P. Matinlinna (Eds), Handbook of Oral Biomaterials, Singapore : Pan Stanford Publishing
Freilich, M.A., Meiers, J.C., Duncan, J.P., dan Goldberg, A.J., 2000, Fiber Reinforced Composites In Clinical Dentistry, Illionis : Quintessence Publishing Co, Inc
Mallick, P.K., 2008, Fiber-Reinforced Composite: Materials, Manufacturing, and Design (3th Ed), Boca Raton : CRC Press, Taylor & Francis Group
Tayab, T, Shetty, A., dan Kayalvizhi, G., 2015, The Clinical Applications of Fiber Reinforced Composites in all Specialties of Dentistry an Overview International Journal of Composite Materials, Vol.5 (1): 18-24
Fonseca, R.B., Marques, A.S., Bernades, K.O., Carlo, H.L., dan Naves, L.Z., 2014, Effect of Glass Fiber Incorporation on Flexural Properties of Experimental Composite, BioMed Research International, 1-6
Mosharraf, R., dan Givechian, P., 2012, Effect of fiber position and orientation on flexural strength of fiber reinforced composite, Journal of Islamic Dental Association of Iran, Vol.24 (1) : 21-27
Husein, A., dan Berekally., 2005, Indirect resin-bonded fibre-reinforced composite anterior bridge: A case report, Australian Dental Journal, Vol.50 (2) : 114-118
Vallittu, P.K., dan Ozcan, M., 2017, Clinical Guide to Principles of Fiber Reinforced Composites in Dentistry, United Kingdom : Elsevier Woodhead Publishing
Khan, A.S., Azam, M.T., Khan, M., Mian, S.A., dan Rehman, I.U., 2015, An update on glass fiber dental restorative composite : A systematic review, Material Science and Engineering, Vol.47 : 26-39
Moezizadeh, M., dan Shokripour, M., 2011, Effects of fiber orientation and type of restorative material on fracture strength of the tooth, Journal of Conservative Dentistry, Vol.14 (4) : 341-345
Prashanth, S., Subbaya, K.M., Nithin, K., and Sachhidananda, S., 2017, Fiber Reinforced Composite : A Review, Journal of Material Sciences and Engineering, Vol.6 (3) : 341
Faizah, A., Widjijono., dan Nuryono., 2016, Pengaruh komposisi beberapa glass fiber non dental terhadap kelarutan komponen fiber reinforced composites, Majalah Kedokteran Gigi Indonesia, Vol. 2 (1) : 13 - 19
Murdiyanto, D., 2017, Sitotoksisitas Non Dental Glass Fiber Reinforced Composite Terhadap Sel Fibroblas Metode Methyl Tetrazolium Test, Jurnal Ilmu Kedokteran Gigi, Vol.1 (1) : 45 - 51
Khalil, A.A., Siswomiharjo, W., Sunarintyas, S., 2016, Effect of Non Dental Glass Fiber Orientation On Transverse Strength Of Fiber Reinforced Composite, Jurnal Teknosains, Vol.5 (2) : 104-110
Sumantri, D., Sunarintyas, S., Herawati, D., 2015, Pengaruh Orientasi Dan Volumetrik Glass Fiber Non Dental Terhadap Kekuatan Perlekatan Geser Fiber Reinforced Composites Untuk Splinting Periodontal, Jurnal B-Dent, Vol2 (1) : 1-9
Sari, W.P., Sunarintyas, S., Nuryono 2015, Pengaruh Komposisi Beberapa Glass Fiber Non Dental Terhadap Kekuatan Fleksural Dari Fiber Reinforced Composite, Jurnal B-Dent, Vol.2 (1) : 29-35
Ahmad, E., Agustiono, P., dan Irnawati, D., 2014, Perbandingan Kekuatan Fleksural Antara Orientasi Unidirectional dan Bidirectional Fiber Agave Sisalana pada Fiber Reinforced Composite, Jurnal Material Kedokteran Gigi, Vol.3(2) : 62 -66
Hadianto, E, Widjijono, Herlliansyah, M.K., 2013, Pengaruh Penambahan Polyethylene Fiber dan Serat Sisal Terhadap Kekuatan Fleksural dan Impak Base Plate Komposit Resin Akrilik, Insisiva Dental Journal, Vol.2(2):57-67
Hamid, N.A., Abdullah, N.H.N., Mansor, M.R., Rosli, M.A.M., dan Akop, M.Z., 2010, An Experimental Study of The Influence of Fiber Architecture On The Strength of Polymer Composite Material, Journal of Mechanical Engineering and Technology, Vol.2 (2) : 1-15
Darvell, B.W., 2018, Materials Science for Dentistry, Unites Kingdom : Elsevier Woodhead Publishing
McCabe, J.F., dan Walls, A.W.G., 2008, Applied Dental Materials (9th Ed.), Australia : Blackwell Publishing
Visser, H.J., Brandt, P.D., dan De Wet, F.A., 2014., Fracture Strength Of Cusp-Replacing Fibre-Strengthened Composite Restorations, Journal of The South African Dental Association (SADJ), Vol.69 (5) : 202 -hadian 207
Maharani, A.S., 2018, Pengaruh Panjang dan Posisi Glass Fiber Non Dental Terhadap Kekuatan Fleksural Fiber Reinforced Composite pada Resin Bonded Prothesis, Tesis, Fakultas Kedokteran Gigi Universitas Gadjah Mada, Yogyakarta
Imam, D.N.A., Sunarintyas, S., dan Nuryono., 2015, Pengaruh Komposisi Glass Fiber Non Dental dan Penambahan Silane terhadap Kekuatan Geser Fiber Reinforced Composite sebagai Retainer Ortodonsi, Majalah Kedokteran Gigi Indonesia., Vol.1(1): hal 53 - 58
Article Metrics
Abstract view : 703 timesPDF - 118 times
DOI: https://doi.org/10.26714/ijd.v1i1.6861
Refbacks
- There are currently no refbacks.
Copyright (c) 2021 Indonesian Journal of Dentistry