ANALISA IMPEDANSI PENGETANAHAN ELEKTRODA BATANG TUNGGAL DALAM BETON RANGKA BAJA TERHADAP INJEKSI ARUS BOLAK BALIK

Achmad Solichan(1*), Rudy Haryanto(2)


(1) Universitas Muhammadiyah Semarang
(2) Universitas Muhammadiyah Semarang
(*) Corresponding Author

Abstract


Low impedance grounding is necessary to anticipate the return flow that can be directly on the ground. Research caruied out by field observations to determine the impedance value which is derived by a single rod electrode: Testing the impedance by the planting depth electrode arrangement and frequency settings. The results obtained were impedance value to a depth of 50 cm for 3.2 to 4.8 Ω, the depth of 100 cm for 3-4 Ω and 150 cm depth of 0.4 to 0.1 Ω.

Key words: Impedance grounding, setting depth grounding.

 


Keywords


impedansi, grounding

Full Text:

PDF

Article Metrics

Abstract view : 456 times
PDF - 320 times

DOI: https://doi.org/10.26714/me.v3i1.205

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright (c)



Editorial Office of Media Elektrika

Universitas Muhammadiyah Semarang FT-FMIPA Building, 7nd Floor. 
Department of Electrical Engineering
Jl. Kedungmundu Raya No. 18, Kota Semarang, Prov. Jawa Tengah, Indonesia 50273

Phone: 085299398663
Email: [email protected]

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.