HALF ADDER UNTUK COUNTER PADA METODE DUMP ACCUMULATOR RFID DENGAN TEKNOLOGI 0.35µm

Ganjar Febriyani Pratiwi, Hamzah Afandi, Dyah Nur ‘Ainingsih

Abstract


RFID tags are divided into active RFID tags and passive RFID tags. In this case  using  a  passive  RFID  tag  that  is  supported  by  using  a  13.56  MHz frequency radio signal. RFID technology is used here to monitor nutrients in the nursery process in the planting medium. The method used in sending data via the 13.56 MHz radio frequency is the Accumulator Dump method. Accumulator dump is a method to change the output of Delta Sigma ADC in the form of serial data into parallel data. The accumulator dump is built from a series  of  registers  and  counters.  For  the  counter  circuit  itself  uses  a combination of NAND gate circuits, Flip-Flop D circuits and Half Adder (HA) circuits. For the half adder circuit itself, it consists of an EX-OR gate and an AND gate. By using 0.35u technology, this half adder circuit is designed on LT- Spice tools which require an input voltage of 3.3 Volts with 11 PMOS and 11 NMOS, with a value of W = 1u and L = 0.35u to produce the desired output. The frequency of the half adder circuit is 50Hz with a maximum power consumption of 0.00363Watt.

Keywords: Tag RFID Pasif, Dump Accumulator, Counter, Half Adder

Full Text:

PDF

Refbacks

  • There are currently no refbacks.


UNIMUS | Universitas Muhammadiyah Semarang
Jl. Kedungmundu Raya No. 18 Semarang

email:Info@unimus.ac.id  http://unimus.ac.id