EFFECT OF SPINDLE ROTATION IN TURNING HIGH CARBON STEEL USING HSS LATHE BLADES ON SURFACE ROUGHNESS AND INTEGRITY OF LATHE BLADES

Muhamad Jafri(1*)


(1) Universitas Nusa Cendana
(*) Corresponding Author

Abstract


This experiment aims to determine the effect of spindle rotation on medium carbon steel turning using an HSS knife, the roughness of the object and the integrity of the blade. In the field of machining, the surface quality of an object can be influenced by several factors such as cutting speed, cutting speed, cutting angle, depth of cut and the material used in the turning process. A good lathe knife must have certain properties, so that later it can produce products with good quality (right size) and economical (short time required). The spindle lathe speed set by the workshop technician for fine-working medium carbon steel is 200 rpm. However, if analyzed using the existing theory, the spindle rotation for medium carbon steel is obtained and for the same HSS lathe, the spindle rotation is 1600 rpm. This can result in surface roughness and defects in the lathe blade, which can vary from small to large. The results showed that the inappropriate selection of spindle rotation when turning medium carbon steel using HSS resulted in defects in the lathe. Defects in the blade affect the surface roughness of the object.

Keywords


Lathe; Medium Carbon Steel; HSS; Surface Roughness; Lathe Knife

Full Text:

PDF

References


Amstead, B.H. (1981). Teknologi Mekanik, Erlangga, Jakarta.

Arifin, A. (2020, August 2). Cara menentukan putaran Mesin Bubut. Diakses dari https://achmadarifin.com/cara-menentukan-putaran-mesin-bubut

Darius, Y., Ade, S., & Rudy. E. (2016). Pengukuran Statis Ketelitian Gepmetrik Mesin Bubut Maximat V13 Di Bengkel Teknik Mesin PNJ Menurut Referensi. Jurnal Politeknologi, 5 (3), 215-228.

Furqon, G. R. S., Firman, M., Sugeng, M. A. P. (2016) Analisa Uji Kekerasan Pada Poros Baja St 60 dengan Media pendingin yang berbeda. Jurnal Teknik Mesin UNISKA, 1 (2), 21-26.

Harahap, M. R. dan Suriyanto, A. (2018). Pengaruh Kondisi Pemotongan Baja Karbon Sc-1045, Menggunakan Pahat Hss Terhadap Kekasaran Permukaan Pada Proses Pembubutan, 2 (2), 69-76.

Nugroho, S. & Senoaji, H. K. (2010). Karakterisasi Pahat Bubut High Speed Steel (HSS) Boehler Tipe Molibdenum (M2) dan Tipe Cold Work Tool Steel (A8). ROTASI, 12 (4), 19-26.

Rochim,Taufik. (1993). Teori dan Teknologi Proses Permesinan. ITB. Bandung.

Romlie, M. & Sunomo. (2012). Kualitas Permukaan Hasil Pembubutan dengan Menggunakan pahat bubut hasil pengembangan, Jurnal Teknik Mesin, 20 (1), 51-61.

Schelesinger, G. (1970). Testing Machine Tools. London: The Machining Publishing Co.

Schey, J. A. (2009). Proses Manufaktur (Introduction to Manufacturing Processes). Yogyakarta: Andi.

Salam, R., Sunarto. (2020) Pengaruh kecepatan potong (Vc) terhadap kekasaran permukaan pada pembubutan kering baja ASTM A 29 menggunakan pahat karbida berlapis Titanium Aaluminium Nitrida (TiAlN). Jurnal Polimesin, 18 (1), 61-67.

Vlack, L.H.V. (1986). Ilmu dan Teknologi Bahan. Diterjemahkan oleh Sriati Djaprie. 1989. Jakarta: Penerbit Erlangga.

Widiantoro, A. W., Khumaedi, M., Sumbodo, W. (2017). Pengaruh Jenis Material Pahat Potong Dan Arah Pemakanan Terhadap Kekasaran Permukaan Baja Ems 45 Pada Proses Cnc Milling. Sainteknol, 15 (1), 13-24.

Zubaidi, A., Syafa’at, I. & Darmanto. (2012). Analisis pengaruh kecepatan putar dan kecepatan pemakanan terhadap kekasaran permukaan material fcd 40 pada mesin bubut cnc. Jurnal ilmiah momentum, 8 (1), 40-47.


Article Metrics

Abstract view : 194 times
PDF - 18 times

DOI: https://doi.org/10.26714/traksi.23.1.2023.%25p

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 TRAKSI

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


TRAKSI : Majalah Ilmiah Teknik Mesin

ISSN : 1693-3451 (Pinted) e-ISSN : 2579-9738 (Online)

Published by: LP2M Unimus bekerjasama dengan APTI (Asosiasi Profesi Teknik Indonesia)  

 
ADDRESS

Jl. Kasipah No. 12 Semarang

E-mail: [email protected] Call: 0248445768


Sponsors

Asosiasi Profesi Teknik Indonesia (APTI)

Website: www.apti.or.id