Penerapan Reliability Centered Maintenance (RCM) Untuk Perawatan Mesin Twin Screw Extruder
(1) Universitas Pamulang
(2) Universitas Pamulang
(3) University of Muhammadiyah Jakarta
(*) Corresponding Author
Abstract
The industrial sector is currently increasingly competitive and intensively developed through increasingly sophisticated technology. One of the factors supporting the effectiveness and efficiency of production is the engine, so that engine performance needs to be maximized. PT. Nirwana Internar Jaya is a company engaged in the manufacture of pipes using a twin screw extruder machine. The machine does production continuously, so it does not rule out the possibility of downtime. This study aims to determine the optimal maintenance action and determine the maintenance time interval on the twin screw extruder machine using the Reliability Centered Maintenance (RCM) method. The results obtained are that it can reduce the downtime of the twin screw extruder machine from 72.5 hours to 27.5 hours by performing maintenance on heating control system components with maintenance time intervals of 155.15 hours or 7 days, motor cooling fan 739.02 hours or 31 days and blower/fan components with maintenance intervals of 828.08 hours or 35 days. Condition monitoring measures also need to be taken to reduce disturbances that can hinder production activities.
Keywords
Full Text:
PDFReferences
Ansori, N., & Mustajib, M. I. (2013). Sistem Perawatan Terpadu (Integrated Maintenance System). Yogyakarta: Graha Ilmu.
Aufal, A. N., Kusumaningrum, & Prasetyo, H. (2014). Usulan Kebjakan Perawatan Area Produksi Trim Chassis Dengan Menggunakan Metode Reliability Centered Maintenance. Jurnal Online Institut Teknologi Nasional, 25-36.
Badariah, N., Sugiarto, D., & Anugerah, C. (2016). Penerapan Metode FMEA dan Expert System. Seminar Nasional Sains dan Teknologi, 1-10.
Denur, Hakim, L., Hasan, I., & Rahmad, S. (2017). Penerapan Reliability Centered Maintenance (RCM) Pada Mesin Ripple Mill. Jurnal Integrasi Sistem Industri, 27-34.
Haizer, J., & Barry, R. (2015). Operation Management (Manajemen Operasi). Jakarta: Salemba empat.
Hakim, L., & Fahrizal. (2012). Penerapan RCM Pada Distribusi Air di PDAM. Jurnal Aptek, Vol.4 No. 2 129-140.
Irawan, D., & Bisono, R. M. (2018). Rancang Bangun Prototype Mesin Ekstrusi Polimer Single Screw. Seminar Nasional Multidisplin, 13-19.
Kurniawan, F. (2013). Manajemen Perawatan Industri : Teknik dan Aplikasi Implementasi Total Productive Maintenance (TPM), Preventive. Yogyakarta: Graha Ilmu.
Manzini, R. (2010). Maintenance For Industrial System. London: Springer.
Mentari, D. (2017). Analisis Pelaksanaan Kegiatan Pemeliharaan (Maintenance) Terhadap Kualitas Produk Pada CV Green Perkasa Pematangsiantar. Jurnal Maker, 40-48.
Pandi, S. D., Santosa, H., & Mulyono, J. (2014). Perancangan Preventive Maintenance Pada Mesin Corrugating dan Mesin Flexo di PT. Surindo Teguh Gemilang. Jurnal Ilmiah Widya Teknik, 33-38.
Pranoto, H. (2015). Reability Centred Maintenance (RCM). Mitra Media Wacana.
Sayuti, M., & Rifa'i, M. (2013). Usulan Perawatan Sistem Boiler Dengan Metode Reliability Centered Maintenance (RCM) pada PT. Z. Jurnal Malikussaleh Industrial Engineering, Vol.2 No. 1 : 9-13.
Article Metrics
Abstract view : 873 timesPDF - 169 times
DOI: https://doi.org/10.26714/traksi.21.2.2021.%25p
Refbacks
- There are currently no refbacks.
Copyright (c) 2021 TRAKSI
This work is licensed under a Creative Commons Attribution 4.0 International License.
TRAKSI : Majalah Ilmiah Teknik Mesin
ISSN : 1693-3451 (Pinted) e-ISSN : 2579-9738 (Online)
Published by: LP2M Unimus bekerjasama dengan APTI (Asosiasi Profesi Teknik Indonesia)
Jl. Kasipah No. 12 Semarang
E-mail: [email protected] Call: 0248445768
Sponsors
Asosiasi Profesi Teknik Indonesia (APTI)
Website: www.apti.or.id