DRUM BRAKE CALCULATION ON HONDA TIGER REVO 200 CC

Bogie Reza Saputra(1*), Kardiman .(2), Najmudin Fauji(3)


(1) Universitas Singaperbangsa Karwang
(2) Universitas Singaperbangsa Karwang
(3) Universitas Singaperbangsa Karwang
(*) Corresponding Author

Abstract


The brake system is one of the components of the engine elements on the vehicle that can support the comfort and safety factor in driving. Brakes function to slow down or stop the movement of the wheels by means of friction. The kinetic energy lost from a moving object is usually converted into heat due to friction. The purpose of this report is to find out the functions, working principles and calculations as well as to know the things that must be considered in planning the drum brake. The method used to make this report is from direct observation of the object, literature study and guidance from the supervisor. From the drum brake specifications that have been described, we can find out the calculation steps needed to find the normal force on the rear wheels, the permissible frictional force, and the maximum use of the brakes. After several calculation steps, the torque on the brakes is 41.82kg.m, the gripping force on the drum brakes is 30.1 kg, the frictional force on the drum brakes is 14.45 kg, the braking capacity of the drum brakes is 2.023 kg. m, the number of braking contacts is 16856contacts. In one month it is assumed that 2500 times the braking contact will be obtained, so that the life of the drum brake pads is 6 months. The canvas can last longer or it can run out quickly depending on the user's usage and further research is needed if you want to get more accurate results because the different types of material and the difference in braking time will affect the lifespan of the brake pads.

Keywords


drum brake, honda tiger revo 200cc

Full Text:

PDF

References


Cookson, M. D., & Stirk, P. M. R. (2019). Spesifikasi Honda Tiger Revo.

Gusniar, I. N., & Ibrahim, S. A. (2021). Analisis Gaya Pada Rem Cakram (Disk Brake) Pada Kendaraan Roda Dua (Honda Beat Sporty 2017). Jurnal Pendidikan Teknik Mesin, 8(November). https://ejournal.unsri.ac.id/index.php/ptm/article/view/15447

Husein, M. A. S. (2020). Analisa Pengaruh Variasi Merek Kampas Rem Diskbreak Sepeda Motor Honda Supra X 125 Terhadap Kinerja Rem. Jurnal Ekonomi Volume 18, Nomor 1 Maret201, 2(1), 41–49.

Intang, A. (2016). Studi Pengaruh Tekanan Pengereman Dan Kecepatan Putar Roda Terhadap Parameter Pengereman Pada Rem Cakram Dengan Berbasis Variasi Kanvas. Teknik Mesin Untirta, II(JurusanTeknik Mesin. Fakultas Teknik, Universitas Tamansiswa Palembang), 9–19.

Nasution, A., Isranuri, I., & Yassin, R. A. (2021). Analisa Performansi, Stabilitas, Dan Slip Pada Kampas Rem Tromol Berbahan Komposit Cpa ( Candlenut Pineapple Aluminium ) Dalam Kondisi Basah Dengan Metode Pengujian Jalan Menggunakan

Sepeda Motor 110 Cc. Dinamis, 9(2), 9. https://doi.org/10.32734/dinamis.v9i2.8443.

Binyamin Binyamin; Anis Siti Nurrokayati; Bagas Bayu Prasetyo; Syahrul Fathur Rahman; Bambang Waluyo Febriantoko, 2009, Rekayasa Pembuatan Kampas Rem Berbahan Dasar Serbuk Tempurung Kelapa Bermatriks Phenolic Resin Terhadap Performa Gesek Pengereman, TRAKSI Vol 19, No 2 (2019): TRAKSI Publisher : Universitas Muhammadiyah Semarang.

Ramadlani, M. A. (2015). Analisa Sistem Pengereman Narrow Three Wheel Vehicle. Institut Teknologi Sepuluh November.

Simbolon, K. (2019). ANALISA KAMPAS REM DENGAN PEMODELAN METODE ELEMEN HINGGA. 28284(113), 28284.

Sumiyanto, S., Abdunnaser, A., & Fajri, A. N. (2019). Analisa Pengujian Gesek, Aus Dan Lentur Pada Kampas Rem Tromol Sepeda Motor. Bina Teknika, 15(1), 49. https://doi.org/10.54378/bt.v15i1.872

Taufik, Ahmad, D. (2018). Pengaruh Penggunaan Rem Belakang Tipe Cakram Terhadap Jarak Pengereman Pada Sepeda Motor Honda Vario Techno CBS.

Yhudianto, P. (2017). Gambaran Umum Rem Sepeda Motor. 8–32


Article Metrics

Abstract view : 9 times
PDF - 3 times

DOI: https://doi.org/10.26714/traksi.22.2.2022.234-248

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 TRAKSI

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


TRAKSI : Majalah Ilmiah Teknik Mesin

ISSN : 1693-3451 (Pinted) e-ISSN : 2579-9738 (Online)

Published by: LP2M Unimus bekerjasama dengan APTI (Asosiasi Profesi Teknik Indonesia)  

 
ADDRESS

Jl. Kasipah No. 12 Semarang

E-mail: traksi@unimus.ac.id Call: 0248445768


Sponsors

Asosiasi Profesi Teknik Indonesia (APTI)

Website: www.apti.or.id