Pelatihan Teknologi Tepat Guna Hydromodelling Di SMK Perkapalan Hang Tuah Tanjung Uban Bintan Untuk Mempersiaplan Kepribadian Unggul di Abad 21

Deny Nusyirwan(1*)


(1) Universitas Maritim Raja Ali Haji
(*) Corresponding Author

Abstract


Kesesuaian teknologi hanya dapat dinilai dalam konteks keseluruhan proses pembangunan sosial dan ekonomi. Sarana penilaian meliputi penilaian teknologi dimana seseorang mengkaji pengaruh luas dari suatu teknologi, dan analisis peluang sosio-ekonomi dimana seseorang memulai dari kebutuhan sosial dan mencari solusi teknologi. Integrasi dan keseimbangan berbagai tingkat teknologi sama pentingnya dengan pemilihan teknologi individual. Insinyur Unggul di Abad 21 tidak mendesain untuk komunitas, namun mendesain bersama komunitas dan memungkinkan desain oleh komunitas. Dengan pelatihan dan pendidikan yang tepat, insimyur dapat membantu mengubah komunitas menjadi lebih baik dengan membekali anggota komunitas untuk memenuhi kebutuhan mereka sendiri dan menerapkan respons desain mereka sendiri. Institusi Perguruan Tinggi hadir di tengah masyarakat memiliki peran yang sangat besar dalam membangun bangsa, Perguruan Tinggi juga menempati posisi strategis dalam melakukan perubahan dalam masyarakat melalui fungsi transformasi Sumber Daya Manusia (SDM), Ilmu Pengetahuan dan Teknologi (IPTEK) dan sosial melalui implementasi kegiatan Tridharma yang meliputi pendidikan, penelitian, dan pengabdian masyarakat.  Dengan latar belakang tersebut maka Program Studi Teknik Perkapalan Universitas Maritim Raja Ali Haji melaksanakan Pengabdian Kepada Masyarakat berupa pelatihan Teknologi Tepat Guna (TTG) yang berupa pelatihan pembuatan model kapal atau dikenal dengan istilah Hydromodelling di SMK Perkapalan Hang Tuah Tanjung Uban, Bintan, Kepulauan Riau. Adapun tahapan pelatihan meliputi memperkenalkan wawasan dan teknologi kemaritiman, menjelaskan bagian-bagian kapal dan selanjutnya memberikan pelatihan terkait perancangan dan produksi kapal. Pelatihan telah mendapatkan sambutan baik dari pihak sekolah dan para siswa yang ditampilkan dengan antusiasme dalam melaksanakan setiap tahapan pelatihan.


References


Bekhta, P., Hiziroglu, S., and Shepelyuk, O., (2009). Properties Of Plywood Manufactured From Compressed Veneer As Building Material, Materials & Design, 30(4), pp. 947-953.

https://doi.org/10.1016/j.matdes.2008.07.001

Bekhta, P., Salca, EA, and Lunguleasa, A., (2020). Some Properties Of Plywood Panels Manufactured From Combinations Of Thermally Densified And Non-Densified Veneers Of Different Thicknesses In One Structure, Journal of Building Engineering, 29, pp. 101116.

https://doi.org/10.1016/j.jobe.2019.101116

Calovi, M., and Rossi, S., (2023). Synergistic Contribution Of Bio-Based Additives In Wood Paint: The Combined Effect Of Pigment Deriving From Spirulina And Multifunctional Filler Based On Carnauba Wax, Progress in Organic Coatings, 182, pp 107713.

https://doi.org/10.1016/j.porgcoat.2023.107713

Cat, https://tokopedia.link/uCl7lGhPrJb, diunduh pada Senin, 20 Mei 2024 07:00

Chen, W., Meng, Q., Hao,H., Cui, J., and Shi, Y., (2017). Construction And Building Materials Quasi-Static And Dynamic Tensile Properties Of Fiberglass/Epoxy Laminate Sheet, Construction and Building Materials, 143, pp. 247-257.

https://doi.org/10.1016/j.conbuildmat.2017.03.074

Dilekçi, A., and Karatay, H., (2023). The effects of the 21st century skills curriculum on the development of students’ creative thinking skills, Thinking Skills and Creativity, 47, pp. 101229.

https://doi.org/10.1016/j.tsc.2022.101229

Filler Poliester, https://tokopedia.link/OXbj0E1OrJb, diunduh pada Senin, 20 Mei 2024 07:00

Haustein, H.,D., Maier, H., and Robinson, J., (1979). Thinking about Appropriate Technology, IFAC Proceedings, 12(6), pp. 25-36.

https://doi.org/10.1016/S1474-6670(17)65673-8

Katalis, https://tokopedia.link/dD82QPoOrJb, diunduh pada Senin, 20 Mei 2024 07:00

Kayu Lapis Berlapis Resin https://tokopedia.link/SBe0MA5NrJb, diunduh pada Senin, 20 Mei 2024 07:00

Koohestani, B., Koubaa, A., Belem, T., Bussière, B., and Bouzahzah, H., (2016). Experimental investigation of mechanical and microstructural properties of cemented paste backfill containing maple-wood filler, Construction and Building Materials, 121, pp. 222-228.

https://doi.org/10.1016/j.conbuildmat.2016.05.118

Krug, D., J., Asuncion, M., Z., Popova, V., and Laine, R., M., (2013). Transparent Fiber Glass Reinforced Composites, Composites Science and Technology, 77, pp. 95-100.

https://doi.org/10.1016/j.compscitech.2012.12.010

Li, Y., Zhao, J., Fang, X., Sun, J., Chen, S., Zhang, W., Wang, B., Zhang, D., Liu, Y.,and Guo, H., (2023). Delignified Wood/Polyethylene Glycol-Based Material With BN As Thermal Conductive Filler For Thermal Energy Storage, Journal of Energy Storage, 68, pp. 107835.

https://doi.org/10.1016/j.est.2023.107835

Mallam, S., C., Lundh, M., and MacKinnon, S., N., (2017). Evaluating a digital ship design tool prototype: Designers’ perceptions of novel ergonomics software, Applied Ergonomics, 59, pp. 19-26.

https://doi.org/10.1016/j.apergo.2016.08.026

Marsot, J., Claudon, L., and Jacqmin, M., (2007). Assessment of knife sharpness by means of a cutting force measuring system, Applied Ergonomics, 38, pp. 83-89.

https://doi.org/10.1016/j.apergo.2005.12.007

Montt-Blanchard, D., Najmi, S., and Spinillo, C., G., (2023). Considerations For Community Engagement In Design Education, She Ji: The Journal of Design, Economics, and Innovation, 9(2), pp. 234-263.

https://doi.org/10.1016/j.sheji.2023.05.004

Moore, M., A., King, F., S., Davis, P., F., and Manby, T., C., D., (1979). The effect of knife geometry on cutting force and fracture in sugar beet topping, Journal of Agricultural Engineering Research, 24(1), pp. 11-27.

https://doi.org/10.1016/0021-8634(79)90057-X

Patrycja Hochmańska-Kaniewska, P., H., Dominika Janiszewska, D., and Oleszek, T., (2022). Enhancement of the properties of acrylic wood coatings with the use of biopolymers, Progress in Organic Coatings, 162, pp. 106522.

https://doi.org/10.1016/j.porgcoat.2021.106522

Pisau Cutter, https://tokopedia.link/ayZ7dfoPrJb, diunduh pada Senin, 20 Mei 2024 07:00

Saleem, S., Dhuey, E., White, L., and Perlman, M., (2024). Understanding 21st Century Skills Needed In Response To Industry 4.0: Exploring Scholarly Insights Using Bibliometric Analysis, Telematics and Informatics Reports, Telematics and Informatics Reports, 13, pp. 100124.

https://doi.org/10.1016/j.teler.2024.100124

Savescu, A., Cuny-Guerrier, A., Wild, P., Reno, G., Aublet-Cuvelier, A., and Claudon, L., (2018). Objective assessment of knife sharpness over a working day cutting meat, Applied Ergonomics, 68, pp. 109-116.

https://doi.org/10.1016/j.apergo.2017.11.008

Serat Kaca, https://tokopedia.link/mfyN10QOrJb, diunduh pada Senin, 20 Mei 2024 07:00

SMK Perkapalan Hang Tuah, Tanjung Uban, Kabupaten Bintan, Provinsi Kepulauan Riau, https://maps.app.goo.gl/nbLgVYd9MreatQUf6, diunduh pada Senin, 20 Mei 2024 07:00

Tang, A., Aleti, A., Burge, J., and van Vliet, H., (2010). What makes software design effective?, Design Studies, 31, pp. 614-640.

https://doi.org/10.1016/j.destud.2010.09.004

van Laar, E., van Deursen, A., J., A., M., van Dijk, J., A., G., M., and de Haan., J., (2017). The relation between 21st-century skills and digital skills: A systematic literature review, Computers in Human Behavior, 72, pp. 577-588..

https://doi.org/10.1016/j.chb.2017.03.010

Wen-Long, C., and Chun-Yi, L., (2013). Trust As A Learning Facilitator That Affects Students' Learning Performance In The Facebook Community: An Investigation In A Business Planning Writing Course, Computers & Education, 62, pp. 320-327

https://doi.org/10.1016/j.compedu.2012.11.007

Yousry, M., and Zaghloul, M., (2021).Developments In Polyester Composite Materials – An In-Depth Review On Natural Fibres And Nano Fillers, Composite Structures, 278, pp. 114698.

https://doi.org/10.1016/j.compstruct.2021.114698

Zhang, Y., Wang, J., Lin, J., Zhang, F., and Yan, X., (2021). Crushing Mechanical Responses Of Natural Wood Columns And Wood-Filled Composite Columns, Engineering Failure Analysis, 124, pp. 105358.

https://doi.org/10.1016/j.engfailanal.2021.105358


Article Metrics

Abstract view : 0 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Jurnal Surya Masyarakat

Jurnal Surya Masyarakat (JSM) is licensed under Creative Commons Attribution-NonCommercial-NoDerivatives 4.0

------------------------------------------------------------------------------------------------------------------------

Jurnal Surya Masyarakat (JSM)
p-ISSN:  2623-0364; e-ISSN: 2623-0569
Published by: Lembaga Penelitian dan Pengabdian Masyarakat (LPPM) Universitas Muhammadiyah Semarang