MECHANICAL STRENGTH ANALYSIS OF COPPER MATERIAL AND BRASS MATERIAL ON FISHING VESSEL PROPELLER

Hanityo A Nugroho(1*)


(1) 
(*) Corresponding Author

Abstract


Starting from events that often have an impact on reducing the age of ships as well as cases of fishermen who often replace damaged ship propellers caused by corrosion. Corrosion that occurs in the propeller shaft of the ship results in material damage. Therefore, the author wants to update the ship's propeller by using copper material compared to brass so that a stronger material is used as a propeller. The results of the research on testing copper and brass show a test analysis. The results of the stress and strain tests on brass and copper materials yield almost the same results. With the same material quality, brass material is recommended to be used as a propeller because the price is cheaper compared to copper material.


Keywords


Propeller; Copper; Brass; Material Test

Full Text:

PDF

References


Andini, May Rista. 2017. Analisis Laju Korosi Logam Kuningan (Brass) sebagai Aplikasi Bahan Propeller Kapal. Surabaya. Universitas Negeri Surabaya

Fadiji, T., Coetzee, C. J., Berry, T. M., Ambaw, A., & Opara, U. L. (2018). The Efficacy of Finite Element Analysis (FEA) as A Design Tool for Food Packaging: A Review. Biosystems Engineering, 174, 20–40.

Febriyanti, Eka, dkk. 2017. Pengaruh Waktu Peredaman dan Penambahan Konsentrasi NaCl (ppm) terhadap Laju Korosi Baja Latelit. Jurnal Mesin Teknologi (SINTEK Jurnal) Volume 11 No. 2 (Desember, 2017). ISSN: 2549-9645

Hendrawan, A. (2019). Analisa Indikator Keselamatan Pelayaran Pada Kapal Niaga Andi. Jurnal Saintara, 3(2)

Hendrawan, A. 2019. Analisa Pengebab Keausan Poros Baling Baling Kapal. Jurnal Saintara Vol 4 No. 1 September 2019

Hendrawan, A. 2019. Analisa Pengebab Keausan Poros Baling Baling Kapal. Jurnal Saintara Vol 4 No. 1 September 2019

Nova, Satria dan Nurul Misbah M. 2012. Analisis Pengaruh Sanilitas dan Suhu Air Laut Terhadap Laju Korosi Baja A36 pada Pengelasan SMAW. Jurnal Teknik ITS Vol. 1, (September, 2012). ISSN: 2301-9271.

Noviadam, Riki. 2017. Analisis Laju Korosi Erosi Pada Baja St 60 Dalam Berbagai Medium Air Laut. Surabaya: Universitas Negeri Surabaya.

Rahmi, M., Canra, D., & Suliono, S. (2018). Analisis Kekuatan Ball Valve Akibat Tekanan Fluida Menggunakan Finite Element Analysis. JTT (Jurnal Teknologi Terapan), 4(2), 79–84.

Rizqi I. Y., Juniawan P. S., Sigiet H. P., 2019. Analisis Tegangan Propeller Kapal Penangkap Ikan Di Kota Dumai Menggunakan Finite Element Analysis. JTT (Jurnal Teknologi Terapan) | Volume 5, Nomor 2, September 2019

Suryani M. 2022. Analisis Korosi Erosi Pada Material Propeller Kapal Berbahan Dasar Paduan Alumunium Dan Aluminium Komersil Dengan Penambahan NaCl. JTM. Volume 10 Nomor 02 Tahun 2022, Hal 123-128

Tan, Y., Li, J., Li, Y., & Liu, C. (2019). Improved Performance Prediction of Marine Propeller: Numerical Investigation and Experimental Verification. Mathematical Problems in Engineering, 2019.

Yaqin R. I., , Angger B. P., Pristiansyah, Muhammad H. A. Binsar M. T. P., 2020. Studi Numerik Umur Kelelahan (Fatigue Life) Pada Propeller Kapal Penangkap Ikan Dengan Kapasitas Mesin 24 HP. JTT (Jurnal Teknologi Terapan), Volume 6, Nomor 1, Maret 2020.


Article Metrics

Abstract view : 146 times
PDF - 37 times

DOI: https://doi.org/10.26714/traksi.23.2.2023.172-184

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 TRAKSI

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


TRAKSI : Majalah Ilmiah Teknik Mesin

ISSN : 1693-3451 (Pinted) e-ISSN : 2579-9738 (Online)

Published by: LP2M Unimus bekerjasama dengan APTI (Asosiasi Profesi Teknik Indonesia)  

 
ADDRESS

Jl. Kasipah No. 12 Semarang

E-mail: [email protected] Call: 0248445768


Sponsors

Asosiasi Profesi Teknik Indonesia (APTI)

Website: www.apti.or.id