ANALISIS PENGENDALIAN MUTU PETIKAN, KADAR AIR DAN SENSORI TEH HITAM PT PAGILARAN MENGGUNAKAN STATISTICAL PROCESS CONTROL (SPC)

Wilda Nur Annisa(1*), Agus Suyanto .(2)


(1) Program Studi Teknologi Pangan, Universitas Muhammadiyah Semarang Jl. Kedungmundu No.18, Kedungmundu, Kec. Tembalang, Kota Semarang, Jawa Tengah
(2) Program Studi Teknologi Pangan, Universitas Muhammadiyah Semarang Jl. Kedungmundu No.18, Kedungmundu, Kec. Tembalang, Kota Semarang, Jawa Tengah
(*) Corresponding Author

Abstract


PT Pagilaran is one of the black tea plantation companies in Indonesia. This study aims to determine the quality control of plucking, moisture content, and sensory at PT Pagilaran. The study used descriptive quantitative research with the Statistical Process Control (SPC) method. Quality control of pluckings using Pareto diagrams, obtained data showing that the type of plucking on young leaves has a value less than MS 40%. Control of the type of picking on young leaves has an average percentage of the Pagilaran garden of 32.6%, Andongsili at 34.4%, Kayulandak at 35.4% and the defective shoots are by the standard not exceeding 15%. This has decreased due to the culture related to employee picking not by company standards, the most important thing is to produce a lot of tea without paying attention to the quality of tea, employee salaries are based on the amount of tea picked. Quality control of moisture content using R-Chart and X-Chart diagrams identified that quality control was within control limits. Sensory quality control using Pareto diagrams in the first and second grades has decreased with a value of 3. Factors that cause quality control of tea are humans, methods, materials, environment, machinery, and storage.


Keywords


Picker Type, Water Content, Sensory, Statistical Process Control, Fishbone

Full Text:

PDF

References


Azizah, F. U., Hamidah, S., & Dewantoro, V. (2020). Analisis pengendalian kualitas produk teh hitam di unit produksi Pagilaran PT. Pagilaran Keteleng, Blado, Batang, Jawa Tengah. Jurnal Dinamika Sosial Ekonomi, 20(1), 65-80.

Badan Standarisasi Nasional. (2016). Standar Nasional Teh Hijau (SNI 3945–2016). Badan Standarisasi Nasional. Jakarta.

Batubara, G., Permai, N. M. S. Y., & Widowati, I. (2021). Analisis pengendalian kualitas produk teh hitam di PT. Perkebunan Tambi unit perkebunan Bedakah Kabupaten Wonosobo Jawa Tengah. Jurnal Dinamika Sosial Ekonomi, 22(1), 1-16.

Fitri, N. S. (2008). Pengaruh Berat dan Waktu Penyeduhan Terhadap Kadar Kafein dari Bubuk Teh. Skripsi. Fakultas Matematika dan Ilmu Pengetahuan Alam. USU. Medan.

Ferdiansyah, M. R., & Zamzami, A. (2022). Evaluasi Metode Pemetikan Teh (Camellia sinensis (L.) O. Kuntze) untuk Memproduksi Teh Hijau di Perkebunan Teh Negara Kanaan, Bandung. Buletin Agrohorti, 10(3), 440-449

Ongong, J., & Ochieng, A. (2013). Innovation in the tea industry: the case of kericho tea, Kenya. Global Journal of Management and Business Research, 13(1), 11-12.

Palupi, E., Lestari, N. A., & Ilham, N. N. (2022). Pengendalian Kualitas Produksi Teh Hijau Menggunakan Metode Seven Tools Pada PT. Rumpun Sari Kemuning I. Bulletin of Applied Industrial Engineering Theory, 3(1).

Permadi, M. R., Oktafa, H., & Agustianto, K. (2018). Perancangan sistem uji sensoris makanan dengan pengujian peference test (hedonik dan mutu hedonik), studi kasus roti tawar, menggunakan algoritma radial basis function network. MIKROTIK: Jurnal Manajemen Informatika, 8(1), 29-42.

Pratami, F. A. 2020. Pengelolaan pemetikan teh (Camellia sinensis (L.) O. Kuntze) di kebun wonosari, PT. Perkebunan Nusantara XII, Malang, Jawa Timur. [skripsi]. Bogor: Institut Pertanian Bogor

Putri, G. R., Lubis, R. F., & Yenita, A. (2021). Analisis Pengendalian Mutu Kadar Air Teh Hitam pada Industri Pengolahan Teh. INVENTORY: Industrial Vocational E-Journal On Agroindustry, 2(2), 81-89

Ramadian, D., Hidayat, R. A., & Yetrina, M. (2022). Pengendalian kualitas proses pengeringan the hitam (orthodox) menggunakan metode DMAIC di PT. Perkebunan Nusantar VIIIKebun Gedeh Mas, Cianjur. Jurnal Penelitian dan Aplikasi Sistem dan Teknik Industri (PASTI), 16(1), 1-13.

Rucitra, A. L., & Fadiah, S. (2019). Penerapan Statistical Quality Control (SQC) Pada Pengendalian Mutu Minyak Telon (Studi Kasus Di PT. X). Agrointek: Jurnal Teknologi Industri Pertanian, 13(1), 72-81.

Supriyadi, E. (2018). Analisis pengendalian kualitas produk dengan statistical proses control (spc) di pt. surya toto Indonesia, tbk. J. Jitmi, 1(1), 63-73.

Thanoza, H., Silsia, D., Efendi, Z. (2016). Pengaruh Kualitas Pucuk dan Persentase Layu terhadap Sifat Fisik dan Organoleptik Teh CTC (Crushing Tearing Curling). Jurnal Agroindustri, 6(1), 42-50.

Windhita, A. (2016). Pengelolaan Pemetikan Tanaman Teh (Camellia sinensis (L.) O Kuntze) di Unit Perkebunan Rumpun Sari Kemuning, Karanganyar, Jawa Tengah. Buletin agrohorti, 4(2), 224-232.


Article Metrics

Abstract view : 47 times
PDF - 16 times

DOI: https://doi.org/10.26714/jpg.14.2.2024.85-94

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Jurnal Pangan dan Gizi



Jurnal Pangan dan Gizi 
ISSN (print) 2086-6429 | 2086-6429  (online)
Organized by Department of Food Science and Technology, Universitas Muhammadiyah Semarang, Semarang, Indonesia
Published by Prodi Teknologi Pangan Universitas Muhammadiyah Semarang
W : https://jurnal.unimus.ac.id/index.php/JPDG 
E : [email protected][email protected]

Jumlah Pengunjung :

 View My Stats

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.